Messages

I'm building two Double Flushes, for myself and a buddy.  I want mine mostly stock, to start with, but my buddy wants to have some components socketed so he can play around with the values.  He requested socketing the components that shape the tone.

Which components would you recommend socketing and playing around with, for tone or other tweaking?

Are there any other mods (any other components that should be socketed) that I should look into?

Thanks!

Actually, I'd PREFER to only have one always-on/always-pulsing LED, and one solid on/off LED to indicate whether the effect is engaged -- just like madbean and pauloman80 suggested.  If the pulsing LED can also indicate waveform/intensity in the Double Flush, that would be really cool too.

I was just hacking away at the schematic last night and got too tired to follow it through all the way.

I'd like to add an external LED that flashes in time with the pulse setting, regardless of whether the Double Flush is active or bypassed.

The instructions state that the LED already doing exactly what I want.  Is this as simple as wiring another external LED in parallel with the LED in the LED/LDR?  Would I need to make any other changes to compensate for the extra current draw, etc.?

Can I just add another LED/resistor in parallel with the existing LED/resistor, but always connected to ground rather than switched?  Then LED2 will always be pulsing, and LED1 will pulse only when the pedal is activated.  Right?