Messages

Everything is installed.  I get sound through my amp in bypass, but when I engage the switch there's no sound.  The clipping leds light up so I guess that means at least part of the circuit's working. Here are some pictures: http://imgur.com/a/qJFUy

Thanks guys I'll get on that when I get a chance.

Hey guys, I'm new to pedal building and madbean.  I've read the beginner threads and I'm gonna try the best I can to do this post right.  I just built a slow loris and the led works, but there is no sound when the pedal is engaged, only when in bypass.  Furthermore, the clipping diodes are lighting up when I strum the guitar. I've checked the soldering and everything looks right.  I've done a fair amount of soldering and other projects I've done haven't had any issues with that.  I've also checked the wiring numerous times and can't find any problems.

My IC voltages are as follows:
1:8.49
2:4.63
3:2.27
4:0
5:0
6:4.63
7:9.27
8:4.69

Transistor voltages:
9.27,1.24,0

Any help or guidance would be greatly appreciated, thanks.