Messages

Ok no worries anymore I fixed it!
I found that there was like a hair sized bridge between the 9v and ground and I removed it and now it works! Thanks for all the help!

Thanks for all the help by the way, I appreciate every bit of advice.
Ok so I didn't socket the pt2399 's, I just soldered them in. I will check the voltages on those parts u listed and will post pics in a little bit.
I will also quadruple check my soldering job on the board for any bridges.
Also, the pot wouldn't be causing any problems as it has a plastic covering on the bottom.
Thanks

I will be using a DC jack when I put the (hopefully working) board in the enclosure, but for now I am trying to hook a battery straight to it.

I'm not using a dc plug at the moment I'm currently just testing it with a battery

Not to sound like a noob beginner (which I am) but what do u mean by that exactly?

Hello, so I am building the zpdd and am having a slight problem. So, when hooking all the jacks up and such and plug in my guitar, I notice that there is sound at high volume, but none of the effect is working. I noticed that the battery gets hot when plugged in, so I am assuming that there is something wrong with the power. I connect a multimeter to it, and find that yes the battery is good, but when connected to the effect, I'm reading no volts when measuring the +9v and ground. What should I do?
I have taken like no steps to 'fix' this as I do not know where to begin.
Thank you,
Jim