Messages

  I will be getting my board when available Brian I did my own pcb on the v1 and i dont know how similiar they are cause i havent compared the schematics yet. You said a 100n after R6, is that in series or parallel to ground. I also see your using pin 13&14 which Ill have to do a sister board for

  I want it, now. You must enter that in build off contest. Angus was only 15 when when they cut their first single Can I get next to you, damn.

That is a awsome pedal, +1 on graphics and orientation

Here is the drill press I used to drill it out along with a lot of tooling oil

30 horsepower electric motor pecock cover, shit shack knobs for now and no mojo parts except the AC 127.
PPP and mouser for parts as usual

That's from a 40 horsepower cooling tower motor we ripped out a long time ago. I dont remember Trannies except theyre from RCA and Germanium PNP's. This took forever to drill out and I'll never drill one of these again

Fuzz at its best, kunzuz over at byoc suppiled me with beastly RCA vintage Trannies, 300+ HFE on each. Enclosure weighs in over 5lbs, no one walking off with this one

I have to start posting builds from boards Ive etched of Madbeans designs. I just finished the Cosmopolitan up yesterday and it fired right up. What s sweet pedal, three stages of necessity in a box, I get my jfet boost, my bc109 silicon fuzz and last but most Importantly is the AC127.
I had primed it for paint and then screwed up, so I left inside but stripped it back down and lacquered it. I haven't chosen knobs but might go with small greenish ones. This is my fourth build of Madbeans and I'm going to do the mxr 117 as soon as its available. I socketed the BC 109(224 HFE) in case I wanted to up the gain, I have a BC109 w 344 HFE and another with 434. If anyone has tried it let me know, if anyone wants to know how it might sound with it let me know, Ill try it out.