Pork Barrel build using BL3207 (MN3207 clone from Small Bear).
Have audio signal on pin 3 - very faint, highly distorted signal on pin 7 & 8.
Jumpers set for 3207 - vertical - Pin 1 test at 0V pin 5 test at 8.9V
Pin 7 & 8 test at just over 4V
What should pin 2, 4 & 6 test at?
BL3207
1 = 0V
2 = 4.35V
3 = 3.78V
4 = 8.25V <----?
5 = 8.91V
6 = 4.34V
7 = 4.54V
8 = 4.54V
Anyone with a working unit with MN3207 or BL3207 voltages that wouldn't mind posting them?
Thanks
Have audio signal on pin 3 - very faint, highly distorted signal on pin 7 & 8.
Jumpers set for 3207 - vertical - Pin 1 test at 0V pin 5 test at 8.9V
Pin 7 & 8 test at just over 4V
What should pin 2, 4 & 6 test at?
BL3207
1 = 0V
2 = 4.35V
3 = 3.78V
4 = 8.25V <----?
5 = 8.91V
6 = 4.34V
7 = 4.54V
8 = 4.54V
Anyone with a working unit with MN3207 or BL3207 voltages that wouldn't mind posting them?
Thanks