Since its going to be at least a few weeks (or more) before I can post what I am currently working on, and inspired by this build report: https://www.madbeanpedals.com/forum/index.php?topic=30931.0
I thought I would post something I did a few years ago, A fuzz pedal in a wooden box.
I had built a 2x12 cab using some Baltic Birch and had some left over.
Here is the schematic
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Fuzz-Face_1966_002.gif)
Made this turret board (its missing a resistor in this picture)
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Fuzz_Face_001.gif)
Gut shot
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_001.gif)
Empty box pre-polishing
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_Drillled_003.gif)
Polishing. I used olive oil (its all I had on hand at the time)
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_In_Process_001.gif)
All done, minus knobs.
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_002.gif)
I had my neighbor, who has a little machine shop in his garage take care of the holes and hollowing out the inside.
I thought I would post something I did a few years ago, A fuzz pedal in a wooden box.
I had built a 2x12 cab using some Baltic Birch and had some left over.
Here is the schematic
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Fuzz-Face_1966_002.gif)
Made this turret board (its missing a resistor in this picture)
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Fuzz_Face_001.gif)
Gut shot
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_001.gif)
Empty box pre-polishing
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_Drillled_003.gif)
Polishing. I used olive oil (its all I had on hand at the time)
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_In_Process_001.gif)
All done, minus knobs.
![](https://img.photobucket.com/albums/v494/CodeMonk/Builds/Baltic-Birch_StompBox/Baltic-Birch-Enc_002.gif)
I had my neighbor, who has a little machine shop in his garage take care of the holes and hollowing out the inside.