Topics

Hello there,

I would like to know if there's a difference between this trimmer and this other trimmer

The Aquaboy DX's says this: "The trimpots are spaced for Bourns 3362P (mouser.com), which are about .25" on a side."

Thank you!

Hello there,

As you may notice for what I'm about to ask and my previous posts, I'm new to this big DIY'ing passion

In this occasion I came across a question:

I'm setting things up for building an Aquaboy DX. The thing is I plan to use a dynamic microphone with it aswell as my guitar.

Should I consider building a preamp and attach it to the aquaboy's PCB with a "line/mic switch" which decides wheter to pass the signal through the preamp or go directly to the aquaboy's PCB?

Hope I was clear enough!

Thank you guys in advance

Francisco.-

Hey there guys!

As I'm from Argentina, bringing parts from the outside is really expensive so I prefer getting all of them from one distributor only.

I've already filled my cart at mouser.com but there's only one thing missing, the vactrol.

Are there any alternatives to the VTL5C3?

Thank you in advance!

Hello guys!

I'm new to this awesome community and I hope I get better and better through time!

I'm about to start building my first Aquaboy DX and I came across a question: Should I care for Ripple Current on capacitors?

My power supply delivers 300 mA and I can't find any 10uF capacitor with that current flow.

Thank you very much for your time and have a nice week!