Topics

   Hi guys anyone knows how can i get 9v from a 48v phamtom power? Thanks in advance.

 

Hi guys someone who can help me to set my DMM for voltages measurements, Im measuring a transistor for my slambox build. Thanks in advance

  hello guys & experts would like to Know if IC TL082 and TL082CP is the same for the Dirbag delay

  Thanks in advance for your wisdom!!! 

    Hey guys i hope if someone can enjoy the discount.

     15% Discount Coupon Code : 333888. Valid till 3 October 2012 ( 1pm New York time ) ...

   hi guys anyone of you know in what pedal is based the Low drive of j..h..s.. ?

   Hi guys, I recently built a sabertooth, my problem is this, I have a bass active and when I connect it to my pedal and then to the amp i hear a very weak  sound, but when I connect to a passive bass I listen very well. What will be the problem ? I hope you can help me thanks in advance.

I have seen some paint his etched PCB of  blue, red, green, etc. and would like to know as they do. Anyone know?

     Hi, i would know if everyone has purchased this resitors at e-bay , it seems to be a very cheap option.

http://www.ebay.com/itm/600X-1-4W-Metal-Film-Resistor-Assort-kit-30-kinds-values-new-1-/251110917128?pt=LH_DefaultDomain_0&hash=item3a77608408

  Hello, Appreciate it if anyone can tell me where I can find the C15: 5nf cap for the chunk chunk!!!! or if i can substitute with another value. Thanks in advance.

  i want to know if i can use a switch DPDT (ON/OFF) instead of a DPST,  is for " the  filter mod" on the green ringer  available in "GGG". Thanks in advance for your Help!!!!

Appreciate it if anyone knows where I can send my guitar to repair, this will pass on Sunday.

 Cupcake for Bass
  Hi, someone can help me, how i convert the cupcake compresor for bass, what components need change for the convertion. thanks a alot.

 Hi everyone could you help me with my sabertooth i wish to do the Impedance Control Pot like in the Mastotron but i have no more space in my enclosure, is posible to do a pedal  for impedance Control with a pot ?

Appreciate it if you could help me on how I can remove the pop sound so loud when I change my bypass pedal that purpose.

  I need to add some resistance to the switch? Thnaks In Advance

  This is my second build take me a lot of time to finish it!!!!!  But here is now , about the paint my wife ask me  if she can paint my plastic white enclosure, and she creates a zebra pedal and i like so much the design.

   In the las part of the wiring job i had a little accident, i burn a little bit the plastic enclosure .

    I hope you enjoy my second master piece IMHO!!! jejejejejeje 

  Hi, someone could explain me the shipping rates post it on the projects page.

my question is if  i could buy 3 board for the shipping rate of 3.50 or i need buy 2 boards for that shipping rate  and i will buy 5 PCB for the 4.25 shippin rate . thanks in advance

  Hi, I have a problem with the resistor that goes to the cathode of the LED, I'm using ultra bright LEDs  but when I put the resistance of 4.7 K, as shown in the wiring diagram the LED does not light so bright as when I place it directly with the battery.

my question is necessary to place the resistance and what is the function of this resistance? Thanks in advance

This is my first pedal I build, I finished a few days ago but had no camera to take pictures and share it with you guys. Not a super wiring but the next will be better.


I thank to all who make this forum for inspiring me to the diy worlDDDD

Help me !!!!! Please because  idon't know how to print the image of sea urchin project pcb for the transfer to copper, because when I try to print it I get the full page size.   

PS. Sorry my bad way of expressing myself in English. Thanks in Advance

 
  1)Salmabox
  2)BS170 Transistor legs
  3)  hi everyone im newbie my  name is otho and im confusing about leg in the BS170  in the slambox project
       actually i have 2N700 in sustitution of the BS170 but in the schematic i dont know who is source, base   
       and collector . please help me!!!!!!! thanks in adavance