Messages

Thanks Reddesert,

I tried to reflow as you described but didn't see any change in voltages.

Im going to pull all 3 IC's and drop sockets in. That's really great advice! Just need to wait for parts to come in now.

I'll let you know what happens after I socket these things.

Thanks again

Hello,

Just wired up the kingslayer and I only hear signal if i play my guitar really hard. (Note: due to not having the right parts, C15 is using a 3n3 cap instead of 3n9- i can't imagine this is the issue though...)

My IC values look really wrong... Is it possible my IC1 is faulty?

IC1: 2v, 2v, 1.6v, .7v, 300mv, 330mv, 7.5v, 8.18v
IC2: .8v, 65mv, 0v, .71v, 0v, 68mv, .8v, 8.18v
IC3: 3.7mv, 0v, 0v, 1.2v, .7v, .64v, 1.25v, 8.18v
onespot: 9.35v

Any ideas what could be wrong?

Did you end up making this? how'd it turn out?

Thanks!

Hello,

I'm working on the kingslayer right now (2nd build ever..!) and I don't have a 422k Resistor for R10, but I do have a 430k resistor. What will this effect? does it matter if i use the 430, instead?

http://www.madbeanpedals.com/projects/Kingslayer/Kingslayer_2015.pdf

thanks!