News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - fredwreck

#1
Build Reports / Boom Boom Brassmaster
May 26, 2024, 08:03:02 PM
I was listening to the bass fuzz on Frank Sinatra's "The World We Knew" and seen that Carol Kaye played the bass.  So I went on her webpage and emailed her to ask what effect that was and she replied! Only problem was she didn't remember the name of the pedal but she sent me a fuzzy picture of herself using it at the Sinatra session and after scouring the internet I found it was the BrassMaster.  This thing sounds amazing!  Thanks MadBean!
#2
Build Reports / Re: Wolfbox Motown DI
September 25, 2019, 04:56:41 PM
I got these from Electronic Surplus. But you just gotta watch on eBay, they come up once in a while.
#3
Build Reports / Wolfbox Motown DI
September 25, 2019, 04:28:37 AM
Came across a couple more Triad A-11j transformers so I had to build another Wolfbox DI.  Once you play bass or guitar through one of these, you'll never want to plug in any other way.
#4
Build Reports / Re: Naughty Fish Wrecktronix
September 21, 2018, 12:14:16 AM
I did the graphics in photoshop and had it etched at a place called http://www.jnetsvc.com/ ask for Janet

#5
Build Reports / Re: Naughty Fish Wrecktronix
September 20, 2018, 05:30:54 PM
Quote from: Aleph Null on September 20, 2018, 05:14:08 PM
Your knob game is strong! Did you silk screen the graphics?

Thank you! No graphics were laser etched.  But had to run the laser on it about 3 times to get it to look clean like that.
#6
Build Reports / Re: Naughty Fish Wrecktronix
September 20, 2018, 05:30:03 PM
Quote from: Govmnt_Lacky on September 20, 2018, 05:28:33 PM
Is that a rare 'light plate' sighting there???  :o

Yea light plate from SmallBear.  Since this thing has an LED that's controlled by the envelope filter, I figured I might as well make it visual!
#7
Build Reports / Naughty Fish Wrecktronix
September 20, 2018, 05:00:25 PM
I think this is My favorite build. If you want that classic funkadelic Bootsy Collins sound, Naughty Fish can't be beat!

I like this pedal in BB size enclosure, which is closer to the big Mutron size pedal.

Enjoy!
#8
Tech Help - Projects Page / Naughty Fish LED
September 18, 2018, 11:22:14 PM
I want to make my LED1 (the envelope driven one) brighter. Would that be resistor R23 or R26??
#9
Build Reports / Re: Mutron builds
July 22, 2018, 01:57:07 AM
Great work i love Mutrons!! How did you do the graphics?
#10
Build Reports / Re: Guitarpcb Small Clone
June 23, 2018, 09:40:04 AM
Quote from: Govmnt_Lacky on June 21, 2018, 08:47:58 PM
You hold trademark on the name?

Also, is that laser etched?
Yes Laser etched
#11
Build Reports / Re: Guitarpcb Small Clone
June 21, 2018, 01:38:04 PM
Quote from: drog_trog on June 21, 2018, 01:35:25 PM
Very nice. Whats that font btw?

Nirvana font i found at freefonts
#12
Build Reports / Re: Guitarpcb Small Clone
June 20, 2018, 02:16:45 AM
Quote from: cooder on June 20, 2018, 02:15:50 AM
That is very sweet... and pink... and nicely put together!
I bet you are your niece's hero for many moons to come!
I better be!! Thanks!
#13
Build Reports / Guitarpcb Small Clone
June 20, 2018, 01:46:28 AM
My niece is playing guitar now, and she's obsessed with Nirvana.  So Being the great Unc I am, I put together this Small Clone Chorus with a PCB from Guitarpcb.com

Feedback appreciated!
#14
Build Reports / Re: DIY sampler/mellotron
January 19, 2018, 06:04:07 PM
Interesting...
#15
Build Reports / Re: Never Again
December 15, 2017, 01:51:56 PM
Quote from: pickdropper on December 11, 2017, 03:25:49 AM
Quote from: BrianS on December 07, 2017, 10:28:46 PM
Ok. You've done it again.  That face plate is gorgeously done.  So freaking jealous of your skills.  Seriously that thing is just amazing.

Could you do a tutorial on this? Plse.

At some point, I may do a tutorial, but the process is fairly easy to describe (it's not all that complicated, really).

1.)  Paint one side of an 1/16" (or 1.5mm) sheet of acrylic with paint of your choice.  I usually choose black.

2.)  Lay out vector artwork in the program of your choice (I use Adobe Illustrator).

3.)  Flip the artwork along the horizontal axis so that text is backwards.

4.)  Etch/cut the plate out on a laser engraver.  I etch with a raster operation and cut it with a vector operation.  With the engraver I use, the line thickness dictates (0.1 stroke) dictates if it's a vector cut.

5.)  Clean off the excess material from the etching.  Usually compressed air works just fine for this.

When you are done, you flip the plate over so that the etching has the text read forward, which puts the etch on the bottom of the acrylic plate, protecting the remaining paint when it's installed on the pedal.


What etcher do you use? And do you glue the acrylic onto the enclosure? Or just screw it down?  Looks gorgeous! Great work!