madbeanpedals::forum

Projects => Build Reports => Topic started by: TreeSlayer on May 28, 2013, 10:31:13 PM

Title: Phase 90, Haberdasher Etched Board
Post by: TreeSlayer on May 28, 2013, 10:31:13 PM
this one works great! it's put together kinda funny, because I had the enclosure drilled for something else. all in all though, it's not too bad.

(http://i53.photobucket.com/albums/g61/TreeSlayer/2013-05-28171917_zps8d5f99a9.jpg) (http://s53.photobucket.com/user/TreeSlayer/media/2013-05-28171917_zps8d5f99a9.jpg.html)

(http://i53.photobucket.com/albums/g61/TreeSlayer/2013-05-28171935_zpsf0968455.jpg) (http://s53.photobucket.com/user/TreeSlayer/media/2013-05-28171935_zpsf0968455.jpg.html)

Title: Re: Phase 90, Haberdasher Etched Board
Post by: midwayfair on May 28, 2013, 10:40:59 PM
Top jacks! I've never actually seen them.
Title: Re: Phase 90, Haberdasher Etched Board
Post by: jimilee on May 28, 2013, 10:41:31 PM
No mod switch?
Nicely done but.....
(https://dl.dropboxusercontent.com/u/5560115/ZomboDroid22052013092023.jpg)
Title: Re: Phase 90, Haberdasher Etched Board
Post by: jimilee on May 28, 2013, 10:42:23 PM
Quote from: midwayfair on May 28, 2013, 10:40:59 PM
Top jacks! I've never actually seen them.
I guess you could fit the pedals closer together on your board...
Title: Re: Phase 90, Haberdasher Etched Board
Post by: TreeSlayer on May 28, 2013, 10:58:16 PM
Quote from: midwayfair on May 28, 2013, 10:40:59 PM
Top jacks! I've never actually seen them.
hehe! yeah, like I said, it's put together kinda funny. the holes were drilled originally for the pots. I turned it upside down and made the holes bigger for the stomp switch and jacks, then drilled for the pot and power. it works good for this type of patch cord.

(http://i53.photobucket.com/albums/g61/TreeSlayer/2013-05-28175519_zps38b7804e.jpg) (http://s53.photobucket.com/user/TreeSlayer/media/2013-05-28175519_zps38b7804e.jpg.html)
Title: Re: Phase 90, Haberdasher Etched Board
Post by: TreeSlayer on May 28, 2013, 11:00:28 PM
Quote from: jimilee on May 28, 2013, 10:41:31 PM
No mod switch?
Nicely done but.....
(https://dl.dropboxusercontent.com/u/5560115/ZomboDroid22052013092023.jpg)
yeah, i'm still trying to figure out how to post a demo. i'm a dumb ass when it comes to computers...
::)
Title: Re: Phase 90, Haberdasher Etched Board
Post by: TreeSlayer on May 28, 2013, 11:03:28 PM
Quote from: jimilee on May 28, 2013, 10:42:23 PM
Quote from: midwayfair on May 28, 2013, 10:40:59 PM
Top jacks! I've never actually seen them.
I guess you could fit the pedals closer together on your board...
it's actually not that much difference in distance to side jacks... ;D
Title: Re: Phase 90, Haberdasher Etched Board
Post by: TreeSlayer on May 28, 2013, 11:08:04 PM
I made this one top jacks also. it's easier to push in and pull out the patch cords when bench testing.

(http://i53.photobucket.com/albums/g61/TreeSlayer/2013-03-03174811_zpsa3148a70.jpg) (http://s53.photobucket.com/user/TreeSlayer/media/2013-03-03174811_zpsa3148a70.jpg.html)
Title: Re: Phase 90, Haberdasher Etched Board
Post by: jimilee on May 28, 2013, 11:10:44 PM
Quote from: TreeSlayer on May 28, 2013, 11:00:28 PM
Quote from: jimilee on May 28, 2013, 10:41:31 PM
No mod switch?
yeah, i'm still trying to figure out how to post a demo. i'm a dumb ass when it comes to computers...
::)
Soundcloud.com