Here's what I've been up to recently, a Lovetone Big Cheese clone in a 125B. I call it the 'Feta Complis'.
It sounds pretty, er, cheesy. It's got the four modes: tone bypass, scoop, hump and cheese. I haven't got the original to compare it to, but it sounds quite close to the demos on YouTube.
My bass player loves this thing on the cheese setting, he says it makes his bass sound rude ;D
Top:
(http://i1080.photobucket.com/albums/j324/plesur/fetacomplistop_zpsad4dce2c.jpg)
Guts:
(http://i1080.photobucket.com/albums/j324/plesur/fetacomplisguts_zps4cf1efb6.jpg)
Emtpy PCB:
(http://i1080.photobucket.com/albums/j324/plesur/fetacomplispcb_zpsccd5ff92.jpg)
Ooh cool! Never built the Cheese myself. Very sweet little layout.
Whatcho got goin on in that there Relay Bypass? Hmm?
Quote from: madbean on January 26, 2013, 06:23:18 PM
Ooh cool! Never built the Cheese myself. Very sweet little layout.
Whatcho got goin on in that there Relay Bypass? Hmm?
The relay bypass is a wider board I made for Jack Orman's AMZ true-bypass relay controller so it could sit on top of the switch right at the front. It's a shame that I've got lots of those little green PCBs he makes for it left over. I'd buy just the PIC chips, but you have to buy 100 at a time.
Very cool stuff.
Shine that enclosure so it'll do those pretty insides justice :D
Quote from: plesur on January 26, 2013, 06:29:27 PM
Quote from: madbean on January 26, 2013, 06:23:18 PM
Ooh cool! Never built the Cheese myself. Very sweet little layout.
Whatcho got goin on in that there Relay Bypass? Hmm?
The relay bypass is a wider board I made for Jack Orman's AMZ true-bypass relay controller so it could sit on top of the switch right at the front. It's a shame that I've got lots of those little green PCBs he makes for it left over. I'd buy just the PIC chips, but you have to buy 100 at a time.
Ahh gotcha. I have one of his board/controller sets. I need to find a good project to use it on.
Awesome layout - great job.
very cool build, that's a very well thought out layout. what's the text in the bottom right corner about!?
Quote from: stecykmi on January 27, 2013, 06:31:08 AM
very cool build, that's a very well thought out layout. what's the text in the bottom right corner about!?
Hey thanks ... and to answer ...
skip to 55 seconds ;)
nice job man.
awesome. you selling pcbs?
Quote from: LaceSensor on January 28, 2013, 09:10:36 AM
awesome. you selling pcbs?
I'm not selling in bulk, but I do have a spare PCB because OSH Park makes you order them in batches of three. If you or anyone else wants it you can have it for cost price: $6/£4. Shipping to the US is about $5. In the UK, £3.
So, totals are $11 US or £7 UK.
Build guide for anyone interested:
https://www.dropbox.com/s/gyya4kp8r4jbydk/Feta%20Complis%20Build%20Guide.pdf
ill take it please pm me paypal details
Nice layout man, great job! :o 8)
PCB arrived today, built it this evening.
Pics shortly. Thanks. If you fab more let me know, please?
oooh, likewise! I'll certainly be up for one.
I'd be down for a pcb as well.
I'd be in for a pcb too :)
^Put me on that list too! Uk also :)
Sweet looking Layout!
George
Hi guys
Thanks for the interest. I'll order a few more when I next order some prototypes from OSH Park. That means the price for a PCB will be exactly the same as before.
OSH Park now has project sharing, which I have enabled for this project. You can order your own copies of the PCBs for the project directly from there if you like.
http://oshpark.com/profiles/plesur
What a mensch! ;D
Are there any UK guys who'd want one of these? Sort of like a mini group buy as I would like 1, and two other dudes could have one?
Shoot me a PM if anyone is interested.
George.
id take another one...or two?
I always thought this was an envelope filter.
I was wrong.
I have to make me one of these.
I'd split some with some fellows in the U.S.
hey jimi i'm prolly going to order 3. you in for 1?
Quote from: Haberdasher on August 01, 2013, 03:54:56 AM
hey jimi i'm prolly going to order 3. you in for 1?
jes!
Quote from: icecycle66 on August 01, 2013, 02:13:10 AM
I always thought this was an envelope filter.
I was wrong.
I have to make me one of these.
the meatball was the lovetone filter...
cheese is a fuzz.
Quote from: Haberdasher on August 01, 2013, 03:54:56 AM
hey jimi i'm prolly going to order 3. you in for 1?
If you are looking to unload the other one, I'll take it. :)
Quote from: wstimson on August 01, 2013, 08:36:34 PM
Quote from: Haberdasher on August 01, 2013, 03:54:56 AM
hey jimi i'm prolly going to order 3. you in for 1?
If you are looking to unload the other one, I'll take it. :)
sure man, no problem
Quote from: jimilee on August 01, 2013, 09:17:10 PM
Quote from: Haberdasher on August 01, 2013, 09:09:55 PM
Quote from: wstimson on August 01, 2013, 08:36:34 PM
Quote from: Haberdasher on August 01, 2013, 03:54:56 AM
hey jimi i'm prolly going to order 3. you in for 1?
If you are looking to unload the other one, I'll take it. :)
sure man, no problem
GROUPBUY!!!!!!!
Hells yes! :) ;D
Anyone have, or expecting to have, a board going spare?
If so, please drop me a PM.
Hey guys, I've just ordered 3 boards, and only need one.
Anyone wants one, PM me ;
Edit: one board sold, one more to go ;)
Necro-bump!
I just threw 3 of these boards into an OSH Park order. I will only build one. If anyone would like a board, let me know!
Quote from: sjaustin on June 01, 2018, 10:41:54 PM
Necro-bump!
I just threw 3 of these boards into an OSH Park order. I will only build one. If anyone would like a board, let me know!
I would like one if you could ship to New Zealand? I could send you another board as a swapsie too maybe, so PM me if you like and we can see...? Cheers
Quote from: cooder on June 01, 2018, 11:35:51 PM
I would like one if you could ship to New Zealand? I could send you another board as a swapsie too maybe, so PM me if you like and we can see...? Cheers
Hey Cooder, in this case I'm mostly interested in offsetting my cost, so an overseas trade probably wouldn't work for me. I don't mind shipping one to you, but the cost to you might be more than having your own board fabricated... not sure how much it would be.