A few days ago, i found a layout for a noisy cricket on a radioshack prefab project board with a headphone jack,and now I can't find it again,does anyone know what I'm talking and have said layout?
http://www.beavisaudio.com/projects/NoisyCricket/ (http://www.beavisaudio.com/projects/NoisyCricket/)
Noisy cricket PDF at the bottom. Also a nice single sided pcb with board mounted pots.
Quote from: aballen on January 20, 2013, 01:19:20 PM
http://www.beavisaudio.com/projects/NoisyCricket/ (http://www.beavisaudio.com/projects/NoisyCricket/)
Noisy cricket PDF at the bottom. Also a nice single sided pcb with board mounted pots.
Thanks,I'm also looking for the layout with the headphone jack,do you have that one?
No but runoff groove has an article on adding a headphone jack to the ruby amp that will accomplish the same thing.
Quote from: aballen on January 20, 2013, 05:10:41 PM
No but runoff groove has an article on adding a headphone jack to the ruby amp that will accomplish the same thing.
That will work, thanks
let me know how yours turned out. i built one and it sounds like a blown speaker.
let me just say that this bitch really neded to be breadboarded. i would also make a ground lug for the chasis mine was looking ugly when it was done. next time im going to take a 2" chunk of 14 gauge copper
and bend it like this ______________
_ l l_ screw it down to the chasis with 2 screws.
lots of bs going on with the grounds, with this you got a place to simply hook it and shoot it.
Will do, did you use the radio Shack board or Vero? I really just want it to test pedals, right now I use my ipod touch with an irig, but that's just a hassle really.
radio shack board, those are good to have a few on the bench
Picked some up today
hmmm
http://www.parts-express.com/cat/audio-amplifier-boards-modules/3464
makes you wonder
Hey man. I was going through my parts bin and found this.
(http://i1200.photobucket.com/albums/bb321/bitracer/Snapbucket/554A0569_zps5e5693b0.jpg)
It's a noisy cricket I etched some time back. The one with board mounted pots and switches. Not quite perfect, but totally useable etch. PM me if you want it. I even tinned it. You just have to drill it and its good to go.
i will take it if jimmi dont want it. let me know. you have the build report for it ?
It's yours if Jimi does not want it. For more info. And parts list check post #2
I got the radio Shack board I was gonna use, do you have a schematic for it?
Layout, parts list and schematic linked above. If you don't want it just say so and it will go to pedalman
Sorry man, I didn't see the link. Imma pass this time. Thank you so much though.
All yours pedalman. Pm me your info and ill drop it in the mail.
Mailed today... And guys if you are having fun with solid state amps check out "Ruby" over at runoffgroove. Really simple and decent sounding.
thanks. and yes, ruby is cool. i got ruby driving my cigar box guitar