So, I posted the Sabertooth I have for sale in another forum.
I got a question and I don't know what it means.
"Does this clone handle 18v pre or does it bug out like a regular WM?"
Pre?
Bug out?
Helf!
My sabertooth is stock build.
What he's asking for is what your parts are rated for. Bug Out is probably slang for 'blow up due to over voltage.'
Pre, I'm not sure of, but I imagine he's talking about voltage, as that's what 18V is indicating.
I recommend two things. 1st, check and see that your parts are rated for 25V or higher, that your transistors can operate at 18V, or if not, then you know. Then, double check and make sure the inquirer is looking to run something at 18V for power, and if your pedal can handle that, then tell him so. If not, tell him that.
Jacob
I love this place.
lol. Nice decyphering Jacob... I would have no idea what he was talking about! :o
There are possible biasing concerns, too, that he might be referring to. Often bumping transistors up to 18V without rebiasing leads to splat. High-gain silicon transistors typically have a wider range to work with, but FETs, germs, and old low-gain transistors (I mean really low -- like FET range) might just stop working if you go more than a volt or two outside the biased range.
The other concern is that it's a two-stage fuzz with feedback. What happens when you raise the supply voltage on the first stage? Less clipping, bigger signal. What happens when you feed a larger signal into an already saturated stage (Q2)? WAY more clipping. Enough to do things like "sag" and actually LOSE output signal.
If your caps are rated 25v or higher, test the pedal on 18v. Just be honest with the buyer about the changes in sound, but come from a position of knowledge and experience when you answer his question.
There appears to be a current fad on TGP of running EVERYTHING at 18v. It's cost someone a Klon so far...
Quote from: juansolo on January 03, 2013, 09:05:20 AM
There appears to be a current fad on TGP of running EVERYTHING at 18v. It's cost someone a Klon so far...
Yes. I have a friend who asks me that about everything I build. He gets it from TGP. It's the new buzzword over there I think.
might as well play the Makita game and bump it to 24v !
by this time next year, we will be powering off arc welders !
LOL
I'm working on a Distortion Box of Doom powered by Nuclear energy for exactly this reason.. it may not be ready for some time though.
Quote from: hammerheadmusicman on January 03, 2013, 10:50:17 AM
I'm working on a Distortion Box of Doom powered by Nuclear energy for exactly this reason.. it may not be ready for some time though.
Way ahead of you, tried this, but the submarine I bought for the power supply didn't fit on my pedalboard.....
You guys took off in the wrong direction. I bet your potential customer is a bass player. And active electronics for basses come in 2 flavours: 9V or powered by 2 batteries at 18V. So in bass player slang you either have a 9V pre or a 18V pre. Dig it?
The standard wooly mammoth is known to have problems with active electronics. These come from 2 sources. One being the low output impedance of such electronics and in some cases, especially with 18V preamps, the output signal level of active basses.
So the guy simply wants to know if your sabertooth will play nice with his active bass.
Hope I could help.
Damn, do we look like a bunch of dumb asses.... Thanks for chipping in, I think you're right on the money! We need more bass players on this forum!
Paul
Quote from: p.eat on January 03, 2013, 05:15:30 PM
You guys took off in the wrong direction. I bet your potential customer is a bass player. And active electronics for basses come in 2 flavours: 9V or powered by 2 batteries at 18V. So in bass player slang you either have a 9V pre or a 18V pre. Dig it?
The standard wooly mammoth is known to have problems with active electronics. These come from 2 sources. One being the low output impedance of such electronics and in some cases, especially with 18V preamps, the output signal level of active basses.
So the guy simply wants to know if your sabertooth will play nice with his active bass.
Hope I could help.
Beat me too it.
Another bass player here.
Quote from: juansolo on January 03, 2013, 09:05:20 AM
There appears to be a current fad on TGP of running EVERYTHING at 18v. It's cost someone a Klon so far...
Be a nice trick for bachelorette parties. Give them a reason to throw some Hamiltons at me. ;D
What is bass? :)
Quote from: gtr2 on January 04, 2013, 04:13:22 AM
What is bass? :)
Something for the guys that can't play guitar to play so they can say they're in a band.
Q: What do you call someone who hangs around with musicians?
A: A Bass Player.
I'm going to catch some crap for that one. :o
Just funnin' guys. I play bass too.
I'm not bassist. Some of my best friends are bass players
I thought a bass player was a guy who liked to hang out in a boat with a stick and string trying to catch fish for fun... I guess I have a couple things to learn.
Good men play guitars.
Better men play bass.
and sissys play keyboard ;D
I would have thought we wouldn't gang up on bass players here, so I'll take the high road.....
What do you call a drummer without a girlfriend?
Homeless
If we're gonna take slam at drummers, here's my take:
How can you tell that a drummer is really, really happy?
He'll be drooling from both corners of his mouth!
Quote from: p.eat on January 03, 2013, 05:15:30 PM
You guys took off in the wrong direction. I bet your potential customer is a bass player. And active electronics for basses come in 2 flavours: 9V or powered by 2 batteries at 18V. So in bass player slang you either have a 9V pre or a 18V pre. Dig it?
The standard wooly mammoth is known to have problems with active electronics. These come from 2 sources. One being the low output impedance of such electronics and in some cases, especially with 18V preamps, the output signal level of active basses.
So the guy simply wants to know if your sabertooth will play nice with his active bass.
Hope I could help.
Being the simpleton that I am, if in fact this is the case, then the asker of the questions should have said so rather than leaving it up to someone to assume one thing or another.
I thought you bass players kept it simple :P :D