Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Topic started by: MattOcaster on October 30, 2012, 05:20:28 PM

Title: Bee Baa and Tone Machine
Post by: MattOcaster on October 30, 2012, 05:20:28 PM
What up guys,

Roland Bee Baa and Foxx Tone Machine in one enclosure - Vintage fuzzy goodness.
I'm a big fan of using space efficiently but this box is packed tight!

(http://i1171.photobucket.com/albums/r559/mtmattan/Bee%20Baa%20Tone/081E8E94-630C-4755-AE29-E5BF8790033B-667-0000011B794255BF_zps021ae1bc.jpg)

(http://i1171.photobucket.com/albums/r559/mtmattan/Bee%20Baa%20Tone/1FEFC563-7AEE-4A50-BE35-CBD6310369BA-667-0000011B25274117_zps6a8995e5.jpg)

(http://i1171.photobucket.com/albums/r559/mtmattan/Bee%20Baa%20Tone/E76166D1-2D64-41F7-ADCE-95E0CB8ADD0B-667-0000011BE18A7113_zps514da87f.jpg)

Kind regards,
Matt.
Title: Re: Bee Baa and Tone Machine
Post by: monkeyssj1 on October 30, 2012, 05:49:59 PM
that's a mean looking robot you got there  8)
Title: Re: Bee Baa and Tone Machine
Post by: GermanCdn on October 30, 2012, 05:50:44 PM
Nice build, love those knobs, and I'm liking the idea of the trimpot as the CLR.  Have to try that (I'm partial to retina burning ultra clears, and that would tame them).
Title: Re: Bee Baa and Tone Machine
Post by: GrindCustoms on October 30, 2012, 09:54:35 PM
Looking real nice! 8)

that's something i never done..........a 2 in 1 fuzz.........., going to get at it i think..... ;D
Title: Re: Bee Baa and Tone Machine
Post by: gtr2 on October 30, 2012, 10:51:00 PM
Thats a fine looking build  ;D
Title: Re: Bee Baa and Tone Machine
Post by: MattOcaster on October 30, 2012, 10:51:51 PM
Yep just need a couple of sanded edges and there's a Grind pedal right there!

Quite pleased about the pairing, covers a lot of ground (Octave up + Bee/Baa mode) but still falling in the realm of 70's crazy ass fuzz.

I know it's a stretch asking on an international forum, but does anyone know where I can get metal plates engraved/cut for use on the front?
Title: Re: Bee Baa and Tone Machine
Post by: GrindCustoms on October 30, 2012, 11:17:47 PM
Quote from: MattOcaster on October 30, 2012, 10:51:51 PM
Yep just need a couple of sanded edges and there's a Grind pedal right there!

Quite pleased about the pairing, covers a lot of ground (Octave up + Bee/Baa mode) but still falling in the realm of 70's crazy ass fuzz.

I know it's a stretch asking on an international forum, but does anyone know where I can get metal plates engraved/cut for use on the front?

Hahaha, sand those edge and sell it on TGP pretending it's made of unicorn tears!

For plates...........check this thread ;)

http://www.buildyourownclone.com/board/viewtopic.php?f=15&t=40836&start=0&st=0&sk=t&sd=a
Title: Re: Bee Baa and Tone Machine
Post by: MattOcaster on October 31, 2012, 02:40:51 AM
Awesome Rej thanks!
Title: Re: Bee Baa and Tone Machine
Post by: lincolnic on November 01, 2012, 04:56:45 AM
Really digging the symmetrical layout.
Title: Re: Bee Baa and Tone Machine
Post by: televisiondown on November 03, 2012, 03:19:59 PM
Very cool idea. These are 2 pedals I'd like to have. All in one box, too!
Title: Re: Bee Baa and Tone Machine
Post by: nzCdog on November 04, 2012, 07:24:15 AM
I like the look of this one... nice work
Text only | Text with Images