Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: teknoman2 on July 22, 2012, 08:13:11 AM

Title: Uproar Resistor Values
Post by: teknoman2 on July 22, 2012, 08:13:11 AM
If I use 11k Ohm instead of 11k3

and 8.2k Ohm instead of 8.25k for the values of R7 & R8

will I face any problems ??

Thanx in advance.
Title: Re: Uproar Resistor Values
Post by: nzCdog on July 22, 2012, 08:14:49 AM
No, go ahead and use them... prolly make no discernible difference :)
Title: Re: Uproar Resistor Values
Post by: teknoman2 on July 22, 2012, 08:16:11 AM
Thanx mate...
Text only | Text with Images