Print Page - Interesting testing option using Behringer cable tester

Title: Interesting testing option using Behringer cable tester
Post by: Om_Audio on March 12, 2012, 07:30:32 PM

I needed to test a problematic pedal (no audio in bypass) and thought I would try to use the test tone feature on my Behringer cable tester. I quickly realized by plugging the pedal in the tester I could see it was showing the intermittent problem on the display. I know this is limited in use but interesting and just thought I would share. Pics show results of pedal switched on and off and the 2nd or 3rd pic shows when prob is occurring (no sound in bypass).
(https://lh5.googleusercontent.com/-8Z0TrXaVwuw/T15JmIDypNI/AAAAAAAAcrI/IrnK_jsDapY/s640/Los%2520Angeles-20120311-00362.jpg)
(https://lh3.googleusercontent.com/-ed6uPe3lnT8/T15JmfbbYRI/AAAAAAAAcrQ/EltPrh895Gc/s640/Los%2520Angeles-20120311-00363.jpg)
(https://lh6.googleusercontent.com/-jlqbH0nqjXM/T15Jmwj0TsI/AAAAAAAAcrY/9KUN-GbQNu0/s640/Los%2520Angeles-20120311-00364.jpg)

Title: Re: Interesting testing option using Behringer cable tester
Post by: nzCdog on March 12, 2012, 07:43:09 PM

Cool idea!

Title: Re: Interesting testing option using Behringer cable tester
Post by: CurlyMo on March 12, 2012, 10:09:10 PM

This is great! I have that exact cable tester sitting in my project bucket next to a couple of builds that are giving me issues that I have yet to explore

Title: Re: Interesting testing option using Behringer cable tester
Post by: bigmufffuzzwizz on March 21, 2012, 04:59:55 PM

Very interesting!

madbeanpedals::forum

General => Open Discussion => Topic started by: Om_Audio on March 12, 2012, 07:30:32 PM