Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Topic started by: Liustucru on February 12, 2012, 10:59:17 AM

Title: 1. RETROGRADE Tycobrahe Octavia
Post by: Liustucru on February 12, 2012, 10:59:17 AM
Hey,
my first finished MADBEAN project.
I've done the Retrograde months ago.
I was a beginner, so the wiring is not neat at all but it works !!!

(http://img838.imageshack.us/img838/742/dscn1519r.jpg) (http://imageshack.us/photo/my-images/838/dscn1519r.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

(http://img824.imageshack.us/img824/3750/dscn1528i.jpg) (http://imageshack.us/photo/my-images/824/dscn1528i.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

(http://img94.imageshack.us/img94/923/dscn1520f.jpg) (http://imageshack.us/photo/my-images/94/dscn1520f.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: tagwap on February 13, 2012, 10:12:10 AM
Nice! Wiring looks neat enough to me.

Is the font engraved on the front?
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: Liustucru on February 13, 2012, 12:47:06 PM
Quote from: tagwap on February 13, 2012, 10:12:10 AM
Nice! Wiring looks neat enough to me.

Is the font engraved on the front?

Thanks  ;)
I'm now using solid core wire that helps especially for the 3pdt part.

Yes the font is engraved into the enclosure as for my Sunking : http://www.madbeanpedals.com/forum/index.php?topic=3839.msg34172#msg34172
I work in an Aerospace research laboratory and we have an old engraver which was used to make office labels.
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: bigmufffuzzwizz on February 13, 2012, 04:48:52 PM
I really like the engraving on the front! Congrats on your first build, with a little planning your wiring will get much neater.  :)
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: Liustucru on February 14, 2012, 09:30:11 AM
Quote from: bigmufffuzzwizz on February 13, 2012, 04:48:52 PM
I really like the engraving on the front! Congrats on your first build, with a little planning your wiring will get much neater.  :)

Thank you  ;)
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: rosettastoned on May 15, 2012, 02:30:13 AM
this is the second time I build this pedal, the first time I used  a pcd from another webpage and it worked great, but then iI try to make it and don´t know why it did work, finally, tryed this layout and bang!!!, it sound again, I changed the transistor, don't remeber  which I used but i´ll check  and post.

ammm and made the three pots version.

so here it is
(http://s18.postimage.org/f8al0tf1l/IMG_0801.jpg) (http://postimage.org/)
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: murdog47 on May 15, 2012, 04:33:08 AM
Looks good! I'm looking forward to the fabbed board to be released for this one  ;D
Title: Re: 1. RETROGRADE Tycobrahe Octavia
Post by: glowsheep on May 15, 2012, 05:00:45 PM
nice, I've been wanting to build one of these for a while. I just made a Small Bear order, so I ended up buying the transformer so that way I've got it on hand.
Text only | Text with Images