So I built this in 11/2016 with 2N3907's straight from tag board. I mad my own strip board from left over copper clad board. Anyone ever built one, have one? I don't remember why I used 2n3907's, specs call for 3906's or similar. I have stash of transistors and want to change them out. Why? Way too loud and fuzzy.
Question 1: any preferences?
Question 2: hfe range for Q1 and Q2
Question 3: lower hfe first or last
So, my bad on the pedal I was working on🥺, I got way ahead of myself. The pedal I was working on was the LoveDrive LesLuis off of Tagboard. I wound up with 2n906's at Q1(170hfe) Q2(190hfe) I set bias at 2.73kOms. I can't put my Tremulox past 1, well I can but damn.
The original post was for my BYOC with NOS O75's for Q1,2,3. That'll help me with a Burns Buzzaround with 0C83's I'll play with.
🙏