Text only | Text with Images

madbeanpedals::forum

Projects => VFE Projects => Topic started by: blearyeyes on December 13, 2023, 11:59:38 PM

Title: Tractor Beam uses 16v zener and is split rail? (For switching board)
Post by: blearyeyes on December 13, 2023, 11:59:38 PM
Tractor Beam uses 16v Zener and is split rail ? (For switching board)
Title: Re: Tractor Beam uses 16v zener and is split rail? (For switching board)
Post by: madbean on December 14, 2023, 12:05:15 AM
Can't remember if Peter ever specified. But, even a 12v would probably be fine.
Title: Re: Tractor Beam uses 16v zener and is split rail? (For switching board)
Post by: Aentons on December 14, 2023, 01:50:31 AM
The original product page said it can handle between 9V to 15V. Whatever you use will be doubled to 18V to 30V.

Title: Re: Tractor Beam uses 16v zener and is split rail? (For switching board)
Post by: blearyeyes on December 14, 2023, 03:38:30 AM
Thanks,

looks like all the other split rail pedals use 16v. I would probably run it @12V. MY PS DOES 9V_12V Selectable..Has a couple of 18v but Ill save those to blow stuff up..
Text only | Text with Images