madbeanpedals::forum

Projects => General Questions => Topic started by: Bucksears on April 20, 2020, 08:18:01 PM

Title: Collosalus Flanger: gone for good?
Post by: Bucksears on April 20, 2020, 08:18:01 PM
Is the Collosalus gone for good, or will it ever get revamped/redesigned/re-released?

Thx!
- Buck
Title: Re: Collosalus Flanger: gone for good?
Post by: madbean on April 21, 2020, 01:08:49 AM
There are no plans to do that at the moment. Not impossible, but I have 2 or 3 other flanger designs I am prototyping in addition to the stereo Current Lover so that is why it was discontinued.
Title: Re: Collosalus Flanger: gone for good?
Post by: Bucksears on April 21, 2020, 12:27:18 PM
Sounds good - thx man!
Title: Re: Collosalus Flanger: gone for good?
Post by: skeeter on April 24, 2020, 07:11:52 AM
I built an early version a few years ago but had all the problems others had ticking ,noise etc I found uk-electronics version 'much better he used a different voltage regulator  the only thing wrong with the two I built was the board is horizontal,uk-electronics also made a pop  free ,oscillation free version of the Plexiclone Boneyard great version currently building a BF-2 clone at the moment Brian hint hint, have a go again at the two above,LM2940CT-15 Low Drop Regulator15V/ 1A TO220 –