Title: Buncha Builds
Post by: dropanchor812 on December 01, 2017, 07:47:03 PM
Post by: dropanchor812 on December 01, 2017, 07:47:03 PM
Hey, it's been a while since I've posted 'round these parts, but my builds are finally things I can be decently proud of, so....
Green Ringer with etched pcb. I found the layout on here several years ago and had the transfers lying around, so why not?
(https://uploads.tapatalk-cdn.com/20171201/9889e896d207fec773d96ba6538ef750.jpg)
Naughty Fish- the switch tip covers really make a difference IMO.
(https://uploads.tapatalk-cdn.com/20171201/b65e70f8dc3e4ce075af5b1bd7991831.jpg)(https://uploads.tapatalk-cdn.com/20171201/905433eeace13a3078d49bed9bdb05fb.jpg)
Broken Arrow OD (AKA Durham Crazy Horse) This was a pcb I got from Black Horse, it sounds great! No gutshot, not sure why I didn't take one.
(https://uploads.tapatalk-cdn.com/20171201/622e4810476be2a3038dc2eb094cf592.jpg)
Mangler - I got this board pop'd from someone else on here with a snazzy PPP enclosure.
(https://uploads.tapatalk-cdn.com/20171201/7ec7fa9b335dc5b1416c154a62c159ea.jpg)(https://uploads.tapatalk-cdn.com/20171201/c08d30170a1eb29ad0a7783ae1fece87.jpg)
Booster - a friend needed a little booster/buffer at the end of his effects chain just as a recovery stage. It's a CAE Line Booster/Driver on vero. Layout from tagboard effects. (https://uploads.tapatalk-cdn.com/20171201/3ebc43d348340bc9382d095c891d0c56.jpg)
CJ's Stutter Trem - sounds grrrrreat! Got this board pop'd by someone on here too. Messy wiring. I made this for someone in exchange for a table saw.
(https://uploads.tapatalk-cdn.com/20171201/5b91479f3cb2f52ea89f2fe714d903ce.jpg)(https://uploads.tapatalk-cdn.com/20171201/bdc60a1824d30eb4b2c324f2003cbb18.jpg)
STM800 - finally got this thing done and it's my fave. Like seriously, my fave. No gutshot for this one either, but I promise I built it!
(https://uploads.tapatalk-cdn.com/20171201/c11ed19cf00f3956c243caffae5f6cbf.jpg)
PTP voltage control - Ha.
(https://uploads.tapatalk-cdn.com/20171201/d8301a6cc1d2f83b664c620a198e75ff.jpg)
Sent from my iPhone using Tapatalk
Green Ringer with etched pcb. I found the layout on here several years ago and had the transfers lying around, so why not?
(https://uploads.tapatalk-cdn.com/20171201/9889e896d207fec773d96ba6538ef750.jpg)
Naughty Fish- the switch tip covers really make a difference IMO.
(https://uploads.tapatalk-cdn.com/20171201/b65e70f8dc3e4ce075af5b1bd7991831.jpg)(https://uploads.tapatalk-cdn.com/20171201/905433eeace13a3078d49bed9bdb05fb.jpg)
Broken Arrow OD (AKA Durham Crazy Horse) This was a pcb I got from Black Horse, it sounds great! No gutshot, not sure why I didn't take one.
(https://uploads.tapatalk-cdn.com/20171201/622e4810476be2a3038dc2eb094cf592.jpg)
Mangler - I got this board pop'd from someone else on here with a snazzy PPP enclosure.
(https://uploads.tapatalk-cdn.com/20171201/7ec7fa9b335dc5b1416c154a62c159ea.jpg)(https://uploads.tapatalk-cdn.com/20171201/c08d30170a1eb29ad0a7783ae1fece87.jpg)
Booster - a friend needed a little booster/buffer at the end of his effects chain just as a recovery stage. It's a CAE Line Booster/Driver on vero. Layout from tagboard effects. (https://uploads.tapatalk-cdn.com/20171201/3ebc43d348340bc9382d095c891d0c56.jpg)
CJ's Stutter Trem - sounds grrrrreat! Got this board pop'd by someone on here too. Messy wiring. I made this for someone in exchange for a table saw.
(https://uploads.tapatalk-cdn.com/20171201/5b91479f3cb2f52ea89f2fe714d903ce.jpg)(https://uploads.tapatalk-cdn.com/20171201/bdc60a1824d30eb4b2c324f2003cbb18.jpg)
STM800 - finally got this thing done and it's my fave. Like seriously, my fave. No gutshot for this one either, but I promise I built it!
(https://uploads.tapatalk-cdn.com/20171201/c11ed19cf00f3956c243caffae5f6cbf.jpg)
PTP voltage control - Ha.
(https://uploads.tapatalk-cdn.com/20171201/d8301a6cc1d2f83b664c620a198e75ff.jpg)
Sent from my iPhone using Tapatalk
Title: Re: Buncha Builds
Post by: Dminner on December 01, 2017, 08:47:23 PM
Post by: Dminner on December 01, 2017, 08:47:23 PM
Awesome knob choice on that STM800
Title: Re: Buncha Builds
Post by: jimilee on December 01, 2017, 10:09:34 PM
Post by: jimilee on December 01, 2017, 10:09:34 PM
That was a crazy weekend you had there.
Title: Re: Buncha Builds
Post by: gordo on December 02, 2017, 12:33:58 AM
Post by: gordo on December 02, 2017, 12:33:58 AM
Loveliness all around. Very nice. The Crazy Horse board was one of those builds I never warmed up to. Never did get it boxed and I have it hanging off my wall as a reminder that I need to deal with it.
Title: Re: Buncha Builds
Post by: dropanchor812 on December 02, 2017, 03:46:12 AM
Post by: dropanchor812 on December 02, 2017, 03:46:12 AM
Thanks folks! Yeah, this is definitely about 7 months of building for me. And I built the Crazy Horse for someone else who was looking for a dirt pedal that was a little different. I can't say I was wild about it either, but it does what it does well! I liked it for a fuzz much more than just trying to use it as an overdrive.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: Buncha Builds
Post by: zombiesonore on December 02, 2017, 09:37:57 AM
Post by: zombiesonore on December 02, 2017, 09:37:57 AM
All of them are very, very nice.
I really like the green ringer & the Devolter. What is the size of this last one?
I really like the green ringer & the Devolter. What is the size of this last one?
Title: Re: Buncha Builds
Post by: TheDude on December 02, 2017, 12:51:13 PM
Post by: TheDude on December 02, 2017, 12:51:13 PM
Quote from: dropanchor812 on December 01, 2017, 07:47:03 PM
CJ's Stutter Trem - sounds grrrrreat! Got this board pop'd by someone on here too. Messy wiring. I made this for someone in exchange for a table saw.
Sent from my iPhone using Tapatalk
Now THAT is a deal I would love to swing with someone right now. Along with a band saw, a planer, a belt sander, uhhh....
Nice builds!
Sent from my LGLS755 using Tapatalk
Title: Re: Buncha Builds
Post by: stringsthings on December 02, 2017, 03:44:21 PM
Post by: stringsthings on December 02, 2017, 03:44:21 PM
Nice builds! I agree with those white toggle switch covers.
The Green Ringer is my fave. The trio of LED's is great.
The Green Ringer is my fave. The trio of LED's is great.
Title: Re: Buncha Builds
Post by: dropanchor812 on December 03, 2017, 04:32:36 AM
Post by: dropanchor812 on December 03, 2017, 04:32:36 AM
Quote from: zombiesonore on December 02, 2017, 09:37:57 AM
All of them are very, very nice.
I really like the green ringer & the Devolter. What is the size of this last one?
The little Devolter box is a 1590LB... a gutshot would have been pretty boring on that one seeing as how it's just a pot and some power jacks. I really liked how the GR turned out too. It was my first try with a water slide decal. Thanks!
Title: Re: Buncha Builds
Post by: oip on December 03, 2017, 06:18:56 AM
Post by: oip on December 03, 2017, 06:18:56 AM
these are awesome! love the lettering (and switch covers)
the devolter is great. i think i'm going to try a buffer in the same size enclosure, my local electronics place sells them.
the devolter is great. i think i'm going to try a buffer in the same size enclosure, my local electronics place sells them.
Title: Re: Buncha Builds
Post by: m-Kresol on December 03, 2017, 10:08:46 PM
Post by: m-Kresol on December 03, 2017, 10:08:46 PM
you've been busy! great builds all around
Title: Re: Buncha Builds
Post by: Coda-effects on December 04, 2017, 09:28:14 AM
Post by: Coda-effects on December 04, 2017, 09:28:14 AM
Nice builds !
I really like the Mangler with the hammertone finish, gives a nice vintage feel to it. Great choice of knobs as well!
I really like the Mangler with the hammertone finish, gives a nice vintage feel to it. Great choice of knobs as well!