Gudday all. Here's Funkasaurus, an EHX Bassballs with the distortion switch moved to a footswitch. Tight fit, first effort with top mounted jacks, which didn't work out due to drilling too close to the screw thread bits inside the enclosure. I opened up the holes, and covered them with washers. This thing is a pig to tune, but it does the job.
That looks slick, man! Great job!
Quote from: Willybomb on October 02, 2017, 02:37:43 AM
first effort with top mounted jacks, which didn't work out due to drilling too close to the screw thread bits inside the enclosure. I opened up the holes, and covered them with washers.
Been there. I ended up grinding away the corners until my jacks fit, but I like your solution as well.
I over this pedal.
Sent from my iPhone using Tapatalk