madbeanpedals::forum

Projects => Build Reports => Topic started by: Luke51411 on August 16, 2017, 11:36:43 PM

Title: Pair of Dminner etches completed
Post by: Luke51411 on August 16, 2017, 11:36:43 PM
These projects have been sitting around half done for maybe a year or more so I'm happy to have them completed!
The first one goes like this SHO (with preset gain)>Rat>musket fuzz. This is a monster pedal! I love it, I don't know why I didn't finish it sooner as I remember loving the first one I sent off to Dan. I think part of the reason was all the off board wiring, well, I found some ribbon wire with four wires attached, IMO much simpler, plus it's rigid so the board stays in place!

(http://i.imgur.com/FOSvD6V.jpg)(http://i.imgur.com/vfHxtG1.jpg)

The second is I think my 3rd build of parasitstudios 0415 guitar synth. Again a dminner etch this time in an overly large box. At first I was stumped as to why I wasn't getting any sound out of it. So I decided to do some troubleshooting. As soon as I started taking voltages on the CD4069 I noticed it was moving a bit. I had forgotten to solder it in... doh. so Once that was fixed it fired right up!

(http://i.imgur.com/qK4fwIP.jpg)(http://i.imgur.com/53OmCLX.jpg)
Title: Re: Pair of Dminner etches completed
Post by: Philthy on August 17, 2017, 12:24:10 AM
awesome
Title: Re: Pair of Dminner etches completed
Post by: scooter7716.pc on August 17, 2017, 12:45:39 AM
Just stumbled on this site. Do you have a place where you sell these?

Sent from my XT1585 using Tapatalk

Title: Re: Pair of Dminner etches completed
Post by: Luke51411 on August 17, 2017, 01:04:41 AM
Quote from: scooter7716.pc on August 17, 2017, 12:45:39 AM
Just stumbled on this site. Do you have a place where you sell these?

Sent from my XT1585 using Tapatalk
Are you looking for the pcbs or the pedals? I just build for myself and occasionally sell off things I dont use.
Title: Re: Pair of Dminner etches completed
Post by: oip on August 17, 2017, 01:15:48 AM
both are amazing!

engage / more / infest : fantastic
Title: Re: Pair of Dminner etches completed
Post by: scooter7716.pc on August 17, 2017, 01:17:02 AM
Oh, ok. Yeah,was just wondering if it was a boutique brand I hadn't heard of. I mostly play  with blues bands, but occasionally do some gigs where they like a more processed sound

Sent from my XT1585 using Tapatalk

Title: Re: Pair of Dminner etches completed
Post by: scooter7716.pc on August 17, 2017, 09:13:27 AM
So I guess I would be interested in a completed pedals

Sent from my XT1585 using Tapatalk

Title: Re: Pair of Dminner etches completed
Post by: Martan on August 17, 2017, 01:42:54 PM
Quote from: scooter7716.pc on August 17, 2017, 09:13:27 AM
So I guess I would be interested in a completed pedals

Sent from my XT1585 using Tapatalk

Freppo (designer of the second circuit) sells some finished builds on his website:

http://www.parasitstudio.se/ (http://www.parasitstudio.se/)
Title: Re: Pair of Dminner etches completed
Post by: scooter7716.pc on August 17, 2017, 02:16:39 PM
Quote from: Martan on August 17, 2017, 01:42:54 PM
Quote from: scooter7716.pc on August 17, 2017, 09:13:27 AM
So I guess I would be interested in a completed pedals

Sent from my XT1585 using Tapatalk

Freppo (designer of the second circuit) sells some finished builds on his website:

http://www.parasitstudio.se/ (http://www.parasitstudio.se/)
Thanks


Sent from my XT1585 using Tapatalk