I ordered components for these two projects and went to print the PCB artwork and didn't see it in the PDFs. Does anyone know why? I just bought more PCB's for etching and was going to do a big run tonight.
If they are no longer available I'm more than happy to buy them, the Mangler anyway, the Dinky isn't available from what I've noticed.
Along this note, is there a "donate" link for Brian anywhere? I've purchased three boards and have etched a couple. I wouldn't mind kicking a few bucks his way when I etch my own.
I've added the Dinky Drive artwork to the doc and uploaded it: http://www.madbeanpedals.com/projects/DinkyDrive/docs/DinkyDrive_ver1.pdf
There is no single side artwork for the current Mangler. But, the Zygote has artwork and it's also a Fuzz Face: http://www.madbeanpedals.com/projects/Zygote/docs/Zygote.pdf
There's also the older Zygote which has less mods and is closer to the current Mangler (attached).
Confused yet?
[attachment deleted by admin]
Thanks for updating the Dinky ! I'll just buy the Mangler board...and if laziness prevails the EgoDriver and a few others while I'm at it. ;D
Cool me.