Print Page - Proco Reissue Rat DPDT to 3PDT with LED

Title: Proco Reissue Rat DPDT to 3PDT with LED
Post by: knd on August 04, 2011, 04:39:30 PM

Hi All,

I was wondering if any of you know how the original DPDT was wired? I am installing a 3PDT switch to add an LED.

Thanks

Title: Re: Proco Reissue Rat DPDT to 3PDT with LED
Post by: k.rock! on August 04, 2011, 05:03:18 PM

Have you unsoldered everything already?

If not, just flip over the enclosure, unsolder one wire and solder to the same location on the 3PDT. Remember the 3PDT is exactly as the DPDT but with an added "column" which you will use to add the LED.

-Kaleb

Title: Re: Proco Reissue Rat DPDT to 3PDT with LED
Post by: mgwhit on August 04, 2011, 05:07:11 PM

Here's an article on RAT bypass switch wiring at Jack Orman's site: http://www.muzique.com/lab/true_bypass.htm (http://www.muzique.com/lab/true_bypass.htm).

madbeanpedals::forum

Projects => General Questions => Topic started by: knd on August 04, 2011, 04:39:30 PM