Print Page - more gain in the channel of HIGH Boneyard.

Title: more gain in the channel of HIGH Boneyard.
Post by: andregarcia57 on July 29, 2011, 10:23:57 PM

I built the project you have in Carl Martin http://freestompboxes.org/index.php that uses a 15v transformer, and rode with 9v Boneyard.
I thought that CM has 15v has more gain.
is to increase the gain of the channel Boneyard HIGH?
I await suggestions
grateful
Andre

Title: Re: more gain in the channel of HIGH Boneyard.
Post by: stecykmi on July 29, 2011, 10:51:28 PM

increase the value of the pot, or put a resistor in series with the pot (ie connect to lug 1 and the board). I would start with something like 500k (resistor) and go up or down from there. I think they make 2M pots which would work probably.

Title: Re: more gain in the channel of HIGH Boneyard.
Post by: andregarcia57 on August 07, 2011, 12:13:26 PM

Quote from: stecykmi on July 29, 2011, 10:51:28 PM
increase the value of the pot, or put a resistor in series with the pot (ie connect to lug 1 and the board). I would start with something like 500k (resistor) and go up or down from there. I think they make 2M pots which would work probably.

OK...

I'm thinking of using 47R resistor R5 is, this increases gain?

Title: Re: more gain in the channel of HIGH Boneyard.
Post by: bigmufffuzzwizz on August 08, 2011, 03:59:33 AM

I haven't built this but I know that value is wrong on the BOM. At the bottom of this thread they are discussing what to change it to. http://www.madbeanpedals.com/forum/index.php?topic=2117.0

Title: Re: more gain in the channel of HIGH Boneyard.
Post by: andregarcia57 on September 05, 2011, 04:27:24 PM

I changed the resistor 47R to gain more and really improved the bass is still slightly below 12v project, which I need to change to increase bass?
I have the two pedals sound more different. 9v and 12v.

madbeanpedals::forum

Projects => General Questions => Mods => Topic started by: andregarcia57 on July 29, 2011, 10:23:57 PM