Print Page - King of (K)lones question.

Title: King of (K)lones question.
Post by: MattL on July 27, 2011, 06:38:00 PM

Having scoured this section, I couldn't find anything on this topic, so I'm sorry if I missed it, but I haven't seen anything on the King of (K)lones even with a search. Anyway, I was just wondering two things:

1. If I do the external presence with a 50k pot, is there a preferable taper?

2. what is the extra ground pad for, that seems fairly deliberately pointed out for?

Thanks!

Title: Re: King of (K)lones question.
Post by: madbean on July 27, 2011, 08:11:03 PM

Use a linear taper.

There are two grounds for convenience. One is next to the 9v pad so you can run both wires directly to your DC jack. The other is at the bottom of the board to wire ground to the switch.

Title: Re: King of (K)lones question.
Post by: MattL on July 31, 2011, 01:14:39 PM

Thanks! If i use star grounding can I use either ground?

Title: Re: King of (K)lones question.
Post by: madbean on July 31, 2011, 03:13:37 PM

Yes.

Title: Re: King of (K)lones question.
Post by: sgmezei on July 31, 2011, 06:45:08 PM

FWIW I used a 50kB and it works great.

Title: Re: King of (K)lones question.
Post by: MattL on August 02, 2011, 09:56:37 PM

Thanks guys, the pedal is fantastic! I've made four other takes on Bluesbreaker pedals, and this is probably the best.

Title: Re: King of (K)lones question.
Post by: bigmufffuzzwizz on August 06, 2011, 07:11:00 AM

I'm gonna follow you guys and bring the presence trimmer to the outside. Seems well worth it.

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: MattL on July 27, 2011, 06:38:00 PM