Print Page - 3dpt Board with Rust Bucket

Title: 3dpt Board with Rust Bucket
Post by: MADWAGNER on April 10, 2016, 08:03:57 PM

Hi everyone,
Was wondering where the L pad would go when using a 3dpt board (1776)?
Thanks for any help,
Jeremy

Title: Re: 3dpt Board with Rust Bucket
Post by: jimilee on April 10, 2016, 09:01:51 PM

You have a board that has that? The L pad is for the led so it may be the ground for the led or if there are resistors on the board then the +v

Sent from my iPhone using Tapatalk

Title: Re: 3dpt Board with Rust Bucket
Post by: MADWAGNER on April 10, 2016, 09:30:30 PM

Thanks for the reply. The rust bucket has a built in LED. But want to use the LED on a 3dpt board.
Thanks
Jeremy

madbeanpedals::forum

Projects => General Questions => Topic started by: MADWAGNER on April 10, 2016, 08:03:57 PM