Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: brand0nized on May 15, 2015, 03:37:47 AM

Title: Can I change the value of the Mix pot in this mixer circuit?
Post by: brand0nized on May 15, 2015, 03:37:47 AM
This schematic calls for a 47kB Wet Level pot. I'm doubling the circuit to make it stereo and the 9mm dual gang pot I want to use only come in 100kB. How important is the value of this pot?

(http://2.bp.blogspot.com/_y4AYtND8Hz8/SarbaMu5qBI/AAAAAAAAAVQ/I3A6H2tlco4/mixer.jpg)
Title: Re: Can I change the value of the Mix pot in this mixer circuit?
Post by: alanp on May 15, 2015, 03:54:05 AM
You could always use resistors on the pot.

http://www.diystompboxes.com/analogalchemy/emh/emh.html (http://www.diystompboxes.com/analogalchemy/emh/emh.html)
Title: Re: Can I change the value of the Mix pot in this mixer circuit?
Post by: brand0nized on May 15, 2015, 07:16:13 AM

Quote from: alanp on May 15, 2015, 03:54:05 AM
You could always use resistors on the pot.

http://www.diystompboxes.com/analogalchemy/emh/emh.html (http://www.diystompboxes.com/analogalchemy/emh/emh.html)

Thanks! Totally forgot about this


Sent from my iPhone using Tapatalk
Text only | Text with Images