Print Page - Slow Loris (Rat) etched pcb

Title: Slow Loris (Rat) etched pcb
Post by: panchokunstmann on December 14, 2014, 06:00:04 PM

Hi,

time without reporting, but for something begins.

It is a simple Slowloris with simple finishing (black matte paint), for a friend.

outside:
(https://lh6.googleusercontent.com/-AKI6A_WCtZI/VI3MH4leRBI/AAAAAAAAAYg/vBV5bSduwm4/w735-h551-no/2014-12-14.jpg)
(https://lh6.googleusercontent.com/-q6KKW77HKBI/VI3LoPP5PlI/AAAAAAAAAW4/c0yhclQUHiM/w735-h551-no/2014-12-14.jpg)

inside:
(https://lh4.googleusercontent.com/-jmAFFa_Mj_A/VI3MBbLG-zI/AAAAAAAAAYw/v01zA72Audc/w735-h551-no/2014-12-14.jpg)
(https://lh4.googleusercontent.com/-e6Sh6gvAZPY/VI3LxtViGPI/AAAAAAAAAY4/IOayImYTMEs/w413-h551-no/2014-12-14.jpg)

I'm not proud for inside but at least it was "clean" (my "inside" idol is juansolo ;D ).

regards

Title: Re: Slow Loris (Rat) etched pcb
Post by: cooder on December 14, 2014, 06:31:27 PM

Great pedal, great build, rockin'! 8)

Title: Re: Slow Loris (Rat) etched pcb
Post by: Hogharry on December 14, 2014, 10:32:07 PM

Clean indeed! Juansolo is Mr Clean. ;D

Title: Re: Slow Loris (Rat) etched pcb
Post by: Leevibe on December 14, 2014, 10:55:05 PM

Great job!

Title: Re: Slow Loris (Rat) etched pcb
Post by: selfdestroyer on December 14, 2014, 11:24:10 PM

The matte black and red knobs works well together. Looks great.

Cody

madbeanpedals::forum

Projects => Build Reports => Topic started by: panchokunstmann on December 14, 2014, 06:00:04 PM