Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: tboulette on November 03, 2014, 05:20:54 PM

Title: Harbinger One with outboard Footpedal
Post by: tboulette on November 03, 2014, 05:20:54 PM
Hi guys/gals:

Any reason I couldn't remove the dual gang pot from the Harbinger One, stick it in (say) an old wah enclosure, and wire it up (with stereo jacks, I'd think) to allow my foot to control "rate," more or less just like the original Uni-Vibe's worked?  Would there be noise issues to contend with?

Thanks!
Title: Re: Harbinger One with outboard Footpedal
Post by: jkokura on November 03, 2014, 05:46:51 PM
If you wait a little longer, there may be a version that's actually designed to drop into a Wah enclosure.

Jacob
Title: Re: Harbinger One with outboard Footpedal
Post by: tboulette on November 03, 2014, 06:41:11 PM
I saw that, but (unfortunately?) I've already bought the board and parts for the original.
Title: Re: Harbinger One with outboard Footpedal
Post by: brejna on November 03, 2014, 06:44:26 PM
You can go harder way and build UVICS from R.G. or be patient and wait for MB fab board.
If you choose first option here is link http://www.geofex.com/FX_images/UVICS-3%20Project%20File-3.pdf (http://www.geofex.com/FX_images/UVICS-3%20Project%20File-3.pdf)
also here is mine build..
http://www.madbeanpedals.com/forum/index.php?topic=16415.msg155514#msg155514 (http://www.madbeanpedals.com/forum/index.php?topic=16415.msg155514#msg155514)
Text only | Text with Images