Print Page - weird short circuit problem on a DOD 250 Clone.

Title: weird short circuit problem on a DOD 250 Clone.
Post by: Wellu on September 03, 2014, 10:13:28 AM

Hello.

I tried to build an dod 250 clone, and all it gives out is a loud hum, it responds to a volume pot.
The circuit in question features ground for input and output.
My best guess is a short in somewhere on the pcb or i just don't understand the grounding very well.

Title: Re: weird short circuit problem on a DOD 250 Clone.
Post by: mgwhit on September 03, 2014, 01:21:22 PM

Or a wiring error. Or any number of problems.

Familiarize yourself with this sticky thread (http://www.madbeanpedals.com/forum/index.php?topic=902.0), specifically jkokura's suggestions. Test continuity through your bypass switching. Test your IC voltages. And, please, post a link to the board and circuit you're working on. Good luck!

Title: Re: weird short circuit problem on a DOD 250 Clone.
Post by: Wellu on September 03, 2014, 08:53:57 PM

Thanks! Will do!

madbeanpedals::forum

Projects => General Questions => Topic started by: Wellu on September 03, 2014, 10:13:28 AM