The project doc for the Slow Lorus says all the pots are 100kB. I always get these new fangled codes wrong, so I looked it up - the first reference site I found says the "B" means "linear" What?
All the old (Keene, et al...) Rat scehmatics I have stashed away say 100K log in all three spots.
What kind of pots does Mr. Lorus really want?
A - Log "Audio"
B - Linear
C - Reverse Log
Yeah Rats are generally "A" pots, but I guess Landgraff had other ideas about which pots are "best."
Maybe ;D
Yeah, but... today the project page says it's a Rat with extra clipping options, not a MoD, so I guess we're back to audio taper. ;D
Anyway, I'm trying to re-create the '85 small box I foolishly sold, so I'll just go with the audio taper.
It is the MoD. According to the original info I had on it, the pots were not labeled for taper. But, I'm pretty sure I picked up from another source that they are linear. There's no wrong way to do it here: either works just as well. If you are not liking the response or feel from one of the controls, then you might find the Audio taper preferable. Personally, I'm not a fan of audio tapers for drive or tone controls. Too much bunching up.
the pcb is not available to print?
I'll get that added.