madbeanpedals::forum

Projects => Build Reports => Topic started by: angrykoko on May 29, 2014, 11:34:05 PM

Title: Tiny SHO
Post by: angrykoko on May 29, 2014, 11:34:05 PM
Hi All

It's been a long time since I did a build report of anything.
Here is my little S.H.O. (even my wife giggles at this).
Built on a FoSHO board and crammed in as best I could with lots of extra dremmel work.
I actually built this back in January and now just finally got frustrated that I had no time to label anything so I dug around and found a bottle of silver testers paint, some stamps and a toothpick (because I cannot find anything like paint brushes since we moved).  Erm... I think you'll see I have no artistic ability but hey.. it was a toothpick!

I totally see why it's such a popular circuit, It's almost always on.

(http://www.angrykoko.com/pictures/sho/20140528_173404-001.jpg)
(http://www.angrykoko.com/pictures/sho/IMAG0314.jpg)
Thanks Midwayfair, I read one of your comments about running a ground to the screw hole when using insulated jacks, was a good idea so I used it :).

Now to find time to paint and label my 3 other builds that have been built since last year.
cheers!
Koko
Title: Re: Tiny SHO
Post by: LaceSensor on May 29, 2014, 11:40:13 PM
Nice

Does it pop a bit when engaged?
Title: Re: Tiny SHO
Post by: rullywowr on May 29, 2014, 11:49:21 PM
Looks great, toothpick or no toothpick!  Very neat wiring too especially in a 1590a.
Title: Re: Tiny SHO
Post by: Leevibe on May 29, 2014, 11:55:54 PM
Looks good man, in and out.
Title: Re: Tiny SHO
Post by: angrykoko on May 30, 2014, 12:03:11 AM
Quote from: LaceSensor on May 29, 2014, 11:40:13 PM
Nice

Does it pop a bit when engaged?

Had to go try it to remember.   Nope,  no pop.  However this has a great stomp switch.  Really smooth,  one of the last from the good batch of pro switches from mammoth.