Print Page - Madbean! I stole your layout!

Title: Madbean! I stole your layout!
Post by: Chi_Boy on March 13, 2011, 10:28:22 PM

Ok, "stole" is a little strong.

I did use the Silverfox layout to do a layout for the Barber Tone Pump that was posted at DIYStompboxes. They are very similar and it made the Tone Pump very easy to do.

Since it is more your work than mine, do you mind if I post it here or there? I really just made it for myself, but it does seem a shame to waste a nice layout. If you want I'll send the Eagle files. Let me know your thoughts.

Cheers,
George

Title: Re: Madbean! I stole your layout!
Post by: mjcyates on March 13, 2011, 11:57:50 PM

I would love to have that layout. I just recently acquired one of these.

(http://i734.photobucket.com/albums/ww345/mjcyates/tonepump2.jpg)

Title: Re: Madbean! I stole your layout!
Post by: madbean on March 14, 2011, 12:14:35 AM

No worries. I saw that schematic over there not too long ago.

We could use some posts in the "Member Projects" area, so it would great if you would post it there!!

Title: Re: Madbean! I stole your layout!
Post by: Chi_Boy on March 14, 2011, 02:38:29 AM

Thanks Brian. I added the post to the projects section as requested. Let me know if you see anything that needs changing.

Cheers,
George

Title: Re: Madbean! I stole your layout!
Post by: Vicus on May 26, 2011, 12:13:27 PM

It's possible to have the eagle file of Grapevine? I need to change some dimension. Thaks.

Title: Re: Madbean! I stole your layout!
Post by: madbean on May 26, 2011, 12:43:53 PM

Quote from: Vicus on May 26, 2011, 12:13:27 PM
It's possible to have the eagle file of Grapevine? I need to change some dimension. Thaks.

The only Eagle files I share are for the "Open Source" projects here: http://www.madbeanpedals.com/forum/index.php?board=15.0

Sorry.

madbeanpedals::forum

General => Open Discussion => Topic started by: Chi_Boy on March 13, 2011, 10:28:22 PM