Is a Phase 45 into a 1590A enclousre.
I use the Soldersound design for the PCB.
(https://lh5.googleusercontent.com/-aAd1qKNPkIc/UqYHglFSKcI/AAAAAAAAASA/ceMeQHhNFNA/w693-h928-no/IMG_5069.JPG)
After drilling the 1590A enclosure all is correct!
(https://lh5.googleusercontent.com/-Stl4GtCoSgI/UqYIH_KQR6I/AAAAAAAAASw/fIxXKyDiPUc/w696-h928-no/IMG_5498.JPG)
After painting... a decal test.
(https://lh6.googleusercontent.com/-iHqO7s-dwBY/UqYHVNHW8jI/AAAAAAAAARk/deHuCkfcwHc/w1237-h928-no/IMG_5506.JPG)
The PCB with soldered components.
(https://lh5.googleusercontent.com/-pJnQI50we4E/UqYHbnmlrHI/AAAAAAAAAR0/B_4BaovzlOY/w1237-h928-no/IMG_5511.JPG)
Not a great job but... it works!
(https://lh3.googleusercontent.com/-1QR1qKPokKc/UqYHsa6yN-I/AAAAAAAAASI/VDXO-idSJAU/w1242-h928-no/IMG_5122.JPG)
Starting the tetris!
(https://lh4.googleusercontent.com/-uwvDPY8-Lls/UqYH1ZH1pCI/AAAAAAAAASQ/2vnTo_DDixQ/w1242-h928-no/IMG_5126.JPG)
Filtering cap. and diode protection.
(https://lh6.googleusercontent.com/-cVS73LJ8OoI/UqYIaHUkYaI/AAAAAAAAAS4/u_EC2qZtGI4/w1237-h928-no/IMG_5534.JPG)
All inside.
(https://lh4.googleusercontent.com/-enla-T9RY8s/UqYIk0JtL7I/AAAAAAAAATA/h-dP33rR41U/w1237-h928-no/IMG_5537.JPG)
And the result!
(https://lh6.googleusercontent.com/-la_i08wr2kA/UqYIo_wFmFI/AAAAAAAAATI/yC6uqPyp9hg/w1237-h928-no/IMG_5541.JPG)
Below.
(https://lh6.googleusercontent.com/-9KP9u9hycEI/UqYJ_6X9gQI/AAAAAAAAATU/b66ZmVJyxuA/w1237-h928-no/IMG_5543.JPG)
With an orange...
I need to solve some noise problems (outside the box did not) but it works!
Looks great! Nice job stuffing all that into a 1590a.
;D
1590A enclosures have something special! Thanks!
Looks great! what's the font you used? I'm working on a MXR phaser myself these days!
Thaks!
I use Palace Script MT, bolt.
Kunstler Script is a good alternative.
On decal test I also used Edwardian Script ITC.
That looks fantastic!
Quote from: mcalaff on December 11, 2013, 03:00:03 PM
Thaks!
I use Palace Script MT, bolt.
Kunstler Script is a good alternative.
Thanks! will post some phaser review soon!
...not as good looking as this one! ;)
Do you have the pcb layout? I've found out that the soldersound site is off, and I'd like to mod it. Sorry for my bad english.
Awesome job, great looks all around and it's tiny!!!
Looks great.. but... I would run the orange into the Phase 45 and not after. Just my 2 cents.
Cody
Quote from: selfdestroyer on May 12, 2015, 05:12:16 AM
Looks great.. but... I would run the orange into the Phase 45 and not after. Just my 2 cents.
Cody
lol! ;D
very clean build, thanks for sharing the pics :)
Nice work! Looks excellent. The actual MXR Script font is called 'Exmouth' in case anyone is interested. You can download it from www.dafont.com