Mini TubeGrinder
Dual OpAmp in Parrallel (JRC4558D/TL072)
3 position Clipping Switch (Symetrical-LED / Lifted / Assymetrical-SiSiLED)
Fat Switch
High Switch
9-18V operation
Layout by Dave/PickDropper 8)
Prepping of the enlightened pot setup...
(https://scontent-b-lga.xx.fbcdn.net/hphotos-ash3/946385_535820309826597_269459749_n.jpg)
Had to hack the jacks a bit...so everything fits confortably....
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/1375933_535820273159934_486123071_n.jpg)
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/r270/1374052_535820236493271_1578773198_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/1374052_535820209826607_1451949165_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/1385633_535820186493276_1877137858_n.jpg)
(https://scontent-a-lga.xx.fbcdn.net/hphotos-frc3/1391794_535820159826612_313433194_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/1395816_535820139826614_1202672504_n.jpg)
5 PCB in a 1590A! ;D
Finally made a clip, sorry for the snizzing and clipping in the envellope part..
:o :o :o :o :o :o :o :o :o
Hey man, don't forget the 2 switches as well as the 5 pcb's 8) whoops, make that 3 ;D
Quote from: hoodoo on October 14, 2013, 11:15:22 AM
Hey man, don't forget the «3» switches as well as the 5 pcb's 8)
Now it's right ;)
Thanks :)
Quote from: Tremster on October 14, 2013, 10:56:51 AM
:o :o :o :o :o :o :o :o :o
:o...... ;D
Excellent Rej!
What so you think of that particular asymmetrical clipping config? I've not tried that one before.
Quote from: pickdropper on October 14, 2013, 12:02:25 PM
Excellent Rej!
What so you think of that particular asymmetrical clipping config? I've not tried that one before.
Thanks man, that board layout was awesome to work with....everything went in place nicely....have helped me to make this thing look right for sure.
Having the LED in the assymetrical clipping soften the overall gain sound and sounds a bit looser while having a good sustain from the Si...try it..., pretty sure you'll dig it.
Quote from: GrindCustoms on October 14, 2013, 12:11:21 PM
Quote from: pickdropper on October 14, 2013, 12:02:25 PM
Excellent Rej!
What so you think of that particular asymmetrical clipping config? I've not tried that one before.
Yeah, I'll give it a shot one of these days.
Thanks man, that board layout was awesome to work with....everything went in place nicely....have helped me to make this thing look right for sure.
Having the LED in the assymetrical clipping soften the overall gain sound and sounds a bit looser while having a good sustain from the Si...try it..., pretty sure you'll dig it.
Quote from: pickdropper on October 14, 2013, 12:27:42 PM
Quote from: GrindCustoms on October 14, 2013, 12:11:21 PM
Quote from: pickdropper on October 14, 2013, 12:02:25 PM
Excellent Rej!
What so you think of that particular asymmetrical clipping config? I've not tried that one before.
Yeah, I'll give it a shot one of these days.
Thanks man, that board layout was awesome to work with....everything went in place nicely....have helped me to make this thing look right for sure.
Having the LED in the assymetrical clipping soften the overall gain sound and sounds a bit looser while having a good sustain from the Si...try it..., pretty sure you'll dig it.
If you have a ZenDrive board laying around...it's where it the shines the most....totally makes the mosfet clipper unnecessary....well..to me..
Ok. I hate you (in a way that really means respect to the max). Nobody should be able to do what you've done in your last two builds. Can't wait to see what's next, I mean where do you go from here!
I've never seen so much done inside an "A" box. Just...wow.
Sent from my SPH-L710 using Tapatalk
Quote from: billstein on October 14, 2013, 04:59:23 PM
Ok. I hate you (in a way that really means respect to the max). Nobody should be able to do what you've done in your last two builds. Can't wait to see what's next, I mean where do you go from here!
Thanks man, i really appreciate it......but i won't agree that «nobody else» can do it....it's just time and a bit of will....and luck...!haha
But i'll completely agree that these 2 last built have been really fun, especially the DigDug.....I dunno...like many other guys here i've built shit-tons of boxes....and at some point it becomes redundant....even if all of the coolest layout comes out...you know it will just go in there without the need to thinker around it....like let say....the first 5 non kit built a rookie can built....where every stripped wire is an achievement...and THAT's the fun and rewarding aspect of this hobby, Achievements.
It's volunteer from my part too, to post detailed crap quality pics of the steps around a built...., when i started i was spending hours in the ShowOff forums to see what could be done and how it was done....These are super-jam-pack'd-compress'd builts...but if you take that and use it in a larger scale....it may help out some folks who have more difficulty to visualize how to manage the logistics of a built.
End of my rant.
To answer you question..................., Behold! Bahahahahaha!
:o
8)
Monstrous!
Simply crazy. You sir have some mad layout skills.
This is just killer man!!! Unbelievable build! It is a tiny glowing beast! ;)
Didn't respond to this earlier because I didn't know what to say.... Still don't know.... Well, maybe... How about this: Build me one!!!!!! I'll PM you Rej, hell, this is cool!!!!
Paul
Finally made a clip, sorry for the snizzing and clipping in the envellope part..
Rej... that was mean... (kinda reminded me of when Ironbird13 tried the Runt, first pedal I've seen where he was happy with the gain at 9 o'clock.)
bloody awesome playing and pedal!
I think I gotta learn some chugging metal, if only to be able to high gain pedals better.
Thanks for the audio Rej.
Jacob
Quote from: alanp on October 29, 2013, 08:11:57 AM
Rej... that was mean... (kinda reminded me of when Ironbird13 tried the Runt, first pedal I've seen where he was happy with the gain at 9 o'clock.)
bloody awesome playing and pedal!
Thanks Alan, that's pretty much how i use most OD when in boosting/cleaning up purpose..., Volume all the way up and gain at 9'oclock...just to open the «valve»...
I'm personnaly meh...with my playing..since i was just throwing spontaneous riff and recent idea.....and i do hate to do does clips.....speaking with my highly broken english alone in my living room...lolol...
Oh well...! At least it shows that the pedal is properly working..hehe :)
Quote from: jkokura on October 29, 2013, 03:44:57 PM
I think I gotta learn some chugging metal, if only to be able to high gain pedals better.
Thanks for the audio Rej.
Jacob
Thanks Jacob, it can't hurt to go into un-tamed paths music wise....
Like when i started to build fuzz......i was really not getting it....it was like...«what the hell...that thing tracks 1 pick stroke out of 5!!!!» lolol It have been a learning curve.....
Would probably be the same thing on your side :)
Rej