Gentlemen,
I have been trying to figure out how to add a vintage/modern switch to my chunk chunk. I found this post
http://www.diystompboxes.com/smfforum/index.php?action=printpage;topic=81411.0
With this schematic
http://img509.imageshack.us/i/drss.png/
Here he says he added a switch to go between vintage and modern. From the diagram it switches between two capacitors coming out of q1 to ground.
I looked at the circuit diagram for the chunk chunk and determined that this was where c3 was.
I took c3 out and replaced it with a wire going to a switch that would let me go between a 1 uF cap and a 470nF cap
Unfortunately I can barely hear any difference, if at all.
Does anyone have any insight into this? Would be greatly appreciated.
Thanks
Tim