Here is my Zombii build. This is my second pedal build and first using Madbean's PCB. Thanks for the cool resources, Madbean.
(http://i763.photobucket.com/albums/xx271/crashgutiar/Zombii/DSCN0708.jpg)
(http://i763.photobucket.com/albums/xx271/crashgutiar/Zombii/DSCN0707.jpg)
very cool. how are you doing your graphics? it looks slick.
I used a pre- painted box from Pedal Parts Plus. The graphics are just the water slide decals from Smallbear. Then I put a few coats of Krylon clear coat on, baked in between each coat. There are a few blemishes and if you look close you can see the edges of the decal. But from any distance at all, it looks OK.
My first pedal was a GGG kit and I painted the enclosure and used a decal sheet I found at a hobby store locally. It didn't turn out nearly as well as this one. I much prefer drilling to painting.
What pots are you using here??
Looks like the pots are 9mm Alphas, like these: Http://www.smallbearelec.com/Detail.bok?no=693
That link was bad, try this one http://www.smallbearelec.com/Detail.bok?no=693 (http://www.smallbearelec.com/Detail.bok?no=693)
Yep, those are the pots. Smallbear is where I got them.
they're out of the 5k I need... Anyone know where else to get them?
Jacob
I believe these are the same thing from Mouser: http://www.mouser.com/ProductDetail/Alpha-Taiwan/RD901F-20-15R1-B53/?qs=sGAEpiMZZMtxdMMi52izyjm9YTycY8j/aVH6ufWRgEw%3d (http://www.mouser.com/ProductDetail/Alpha-Taiwan/RD901F-20-15R1-B53/?qs=sGAEpiMZZMtxdMMi52izyjm9YTycY8j/aVH6ufWRgEw%3d). Looks like they are a little more expensive than Smallbear, though.
Similar but not identical. Those are 50k not 5k
Try searching Mouser for this part number: RD901F-20-15R1. I'm pretty sure they have the 5K ones. I stole the part number from Smallbear to search Mouser and they came pretty easily.
what style knob did you use on this? when i board mounted my pots, the knobs i got didnt fit.
I used these: http://www.smallbearelec.com/Detail.bok?no=644 (http://www.smallbearelec.com/Detail.bok?no=644).
I have since removed them. They were actually touching each other, so if you adjusted one, it would make one next to it move as well.