Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: Jederino on June 07, 2013, 02:31:38 PM

Title: Solder bridge question
Post by: Jederino on June 07, 2013, 02:31:38 PM
Building the Egodriver.  Possibly have a hairline bridge between C1 and R2.  Brain fart in bending my lead the wrong way.  Thing is, their connected anyway.  Should I bother trying to clean it up?

Thanks!
Title: Re: Solder bridge question
Post by: TNblueshawk on June 07, 2013, 03:05:41 PM
If they are connected on the schematic/PCB by a trace then no need to separate, if I understand you correctly.
Text only | Text with Images